Plated Bollard Covers the Only Cover That Hides Your Base Plate Too

Plated bollard covers are one piece plastic coverings that slide over a 6” bollard pipe and extend all the way down to cover a 10” x 10” base plate — bolts, hardware and all. No other bollard cover on the market does both in a single piece. Maintenance free, available in 13 standard colors and custom, with a five year warranty. See the complete variety below or call our staff for assistance in choosing the correct color for your site.

What Are Plated Bollard Covers?

A plated bollard cover is a single-piece plastic sleeve that covers a 6” bollard pipe and its 10”x10” base plate in one installation. It is the only bollard cover of this type on the market. The flange on the bottom fits over 10” x 10” x 5/8” base plates and gives 3” of clearance underneath, enough to hide most exposed anchor bolts. This improves the look of surface mounted bollards and removes a common trip and snag hazard for workers and consumers.

They are also known as base plate bollard covers or facility safety bollard covers. These covers are made from low density thermoplastic polyethylene with UV and anti-static additives. They will not chip or crack under normal outdoor use and are covered by a five-year warranty.

The most adaptable all-in-one bollard finishing option available today for plated bollard covers. Available in 13 basic colors plus custom color matching. If you are seeking to acquire plated bollard covers for a warehouse, storefront or multi-site facility, this is the only product that handles pipe and plate in one shot.

Where Are Plated Bollard Covers Used?

• Warehouses & distribution centers
• Retail storefronts
• Loading docks
• Parking lots & garages
• Manufacturing facilities
• Hospitals & medical facilities
• Schools & campuses
• Any site with surface-mounted, base-plated bollards

Plated bollard covers are particularly frequent where exposed anchor bolts represent a safety hazard and are among the most feasible facility safety bollard covers for high-traffic commercial and industrial locations.

How to Choose the Right Plated Bollard Cover

Pipe & Base Plate Fit – Know Your Measurements

Plated bollard covers are made to accommodate a 6” nominal pipe diameter and 10” x 10” x 5/8” base plate. Please verify your bollard pipe OD, base plate sizes before ordering. The base plate cover piece gives 3” of vertical clearance underneath – enough room for most standard anchor bolt arrangements. If the size of your base plate is different, please call our team before purchase.

Height — 48” Pipe Coverage

The pipe component of the plated bollard cover fits over pipe heights up to 48” high. Note that this dimension does not include the height of the dome top. Fancy a different pipe height? Talk to our experts about custom alternatives.

Color — 13 Standard Colors & Custom Colors

Unlike most bollard covers on the market today, plated bollard covers are offered in 13 standard colors including Safety Yellow, Red, Blue, Black, White and more, plus full custom color matching to meet brand or facility needs. If required, our experts will work with you to match current bollard coverings or corporate colors.

Material- LDPE with Anti Static and UV Additives

All plated bollard covers are produced from low density thermoplastic polyethylene with added UV and anti-static properties. This formulation resists fading, cracking and surface dust accumulation for permanent outdoor and interior installations. No painting, no sealing or re-coating – ever.

Installation - Two-Piece Tape, No Tools

Each cover comes with two pieces of fastening tape. Slide the cover over the pipe and base plate, tape it up and you are done. No drilling. No adhesives. No professional installer necessary. See the whole installation in under a minute using the link given with your order.

Budget — One Price. Two Problems Solved.

A single plated bollard cover substitutes a pipe cover and a separate base plate bollard cover. Bulk price from 10 units – contact our team for volume and multi-site pricing.

Why Buyers Choose Our Plated Bollard Covers

The Only One of Its Kind

• One-piece cover for pipe AND base plate
• No other product on the market does this
• Eliminates the need for two separate covers
• Patent-pending design

Hides Exposed Anchor Bolts

• 3” clearance under the base plate section
• Covers most standard anchor bolt configurations
• Reduces trip and snag hazards for workers and customers
• Cleaner, more professional site appearance

13 Colors + Custom Matching

• More color options than any comparable cover
• Custom colors available for brand and facility matching
• Consistent finish across your entire site
• No painting — color is built into the material

Five-Year Warranty

• Will not fade, crack, or peel under normal conditions
• UV and anti-static additives built into the LDPE
• Backed in writing — not a marketing claim
• Maintenance-free for the life of the cover

Installs in Seconds

• Two pieces of securing tape included
• No tools, no adhesives, no installer
• Video installation guide included with every order
• On-post fit is secure and permanent

Frequently Asked Questions

Q: What makes plated bollard covers different from standard bollard covers?

A: The plated bollard cover is the only cover on the market that covers both the bollard pipe and base plate in one piece design. Standard bollard covers only cover the pipe leaving the base plate and anchor bolts exposed. The plated version fixes both concerns with one installation.

Q: What size base plate do plated bollard covers fit?

A: Plated bollard covers are for a 10” x 10” x 5/8” base plate on a 6” nominal pipe. The base piece has 3” of clearance underneath which accommodates most standard exposed anchor bolts. If your base plate size is different please give our team a call before purchase.

Q: How are plated bollard covers installed?

A: Slide the plated bollard cover over the bollard pipe and down over the base plate. Close it off using the two pieces of installation tape that come with each cover. No tools, no glue, no expert installer required. Includes Full Video Walk-through - Link Provided With Your Order.

Q: Are plated bollard covers the same as Ideal Shield bollard covers?

A: One popular and well known brand of standard pipes is the Ideal Shield bollard covers. As the only base plate bollard cover with an integrated base plate flange, Bollard and Sleeves' plated bollard covers go one step further and provide a more comprehensive facility safety bollard cover solution for surface-mounted bollards with exposed anchor bolts.

Q: How much do plated bollard covers cost?

A: Color and order quantity have an impact on pricing. For a price, get in touch with our team. Net 30 terms are available for eligible government, school, and contractor customers, and bulk pricing begins at 10 units. Within one business day, a quote is sent.

Q: Do plated bollard covers come in custom colors?

A: Indeed. Plated bollard covers come in 13 common colors as well as custom colors to complement your facility, brand, or current bollard cover scheme. We'll verify availability if you contact our staff with your color specification or RAL/Pantone reference.

Q: What is the lead time, and do you ship to all 50 states?

A: Plated bollard covers that are in stock are shipped from our US warehouse in three to five business days. We ship to every state in the union. Orders for custom colors could need a longer lead time; contact our team for availability.

One Cover. Pipe, Plate, and Bolts — Done.

Tell us your site, quantity, and color — we’ll send a quote within one business day. Buy plated bollard covers in bulk and pay less per unit — volume pricing starts at 10 units.

Get a Free Quote → Call 1-800-914-4771

Made in USA · Ships in 3–5 Days · 5-Year Warranty · Net 30 for Gov

Browse by Type

Flat Top Bollard Covers | 1/4” Heavy Duty Bollard Covers | Decorative Bollard Covers | Plated Bollard Covers | Square Bollard Covers | UV Lighted Bollard Covers | Hardwired Lighted Bollard Covers | 1/8” Standard Bollard Covers